Skip to main content

AVM 32*SF132U

Valve actuator (AVM 321, 322)

Automatic adaptation to valve, optimal operator convenience, precision activation and high energy efficiency with minimal operating noise.

 

Type

AVM321SF132U

AVM322SF132U

 

Features

  • In ventilation air conditioning units for actuation of 2- and 3-way valves of type series AVM 321: VUD, VUE, VUN, BUD, BUE, BUN and AVM 322: V6R, VQD, VQE, VUG, VUP, VUS, B6R, BQD, BQE, BUG, BUS
  • For controllers with a switching output (2-point or 3-point control)
  • Synchronous motor with electronic control unit and load-dependent cut-off
  • Direction of operation and running time can be set using coding switches
  • Crank handle for external manual adjustment with motor cut-off
  • Low operating noise
  • Simple assembly with valve; spindle is automatically connected after nominal voltage is applied
  • Numerous adapters enable the unit to be fitted onto non-SAUTER valves
  • Electrical parallel operation of five actuators
  • Three-piece housing made of flame-retardant yellow/black plastic and seals with type of protection IP54
  • Maintenance-free gearbox made of plastic; threaded spindle and gearbox base-plates made of steel
  • Patented actuator-valve coupling
  • Mounting column made of aluminium
  • Fixing bracket made of cast light alloy for valve fitting with 20 mm stroke and made of plastic for valve fitting with 8 mm stroke
  • Electrical connections (max. 1.5 mm²) with screw terminals
  • Two break-out cable inlets for metric cable gland made of plastic M20 × 1.5
  • Fitting vertically upright to horizontal, not suspended

 

Documents

Technical Data Sheet

Mounting Instructions

 

Combination with non-SAUTER valve manufacturers | Retrofit | SAUTER (sauter-retrofit.com)

 

Back

*Photos and illustrations are non-contractual

© 2024  Fr. Sauter AG All rights reserved