| ASM 1.5S F152: High-speeddamper drive
How energy efficiency is improved
Accurate control and electronic cut-off for efficient use of energy.
Areas of application
For controllers with continuous (0...10 V or 4...20 mA) or switched output (2- or 3-point control). For activating air, shut-off, restrictor and multi-slat dampers
Properties
- 5 Nm and 10 Nm of torque and holding torque
- 3 s running time for 90° with 5 Nm and 6 s running time with 10 Nm
- 24 V~/=
- Signal input 0...10 V and 4...20 mA
- Direction of rotation is selected via DIP switches
- Pulse length can be altered in 3-point mode, i.e. internal modification of the start-up time
- Degree of protection IP 54
- Self-centring spindle adaptor
- Transmission can be disengaged in order to position the damper or to make manual adjustments
- Brushless motor with electronic control and electronic cut-off
- Maintenance-free
- Intelligent adaptation of the angle of rotation, including adaptation of the feedback
- Electronically cuts out, depending on load
- Freely configurable using the CASE Drives PC tool
Technical description
- Housing made of fire-retardant plastic, lower section black and upper section yellow
- Power cable 1.2 m long, 6 × 0.5 mm²
- Fitting: upright or horizontal, but not upside down
|
