| ASM 1.5S F132: Actuators with SUT 5, 10 Nm
How energy efficiency is improved
Torque related cut-off for efficient energy use.
Areas of application
For controllers with continuous output (0 - 10 V) or switching output (2-point or 3-point control). For actuation of air, shut-off and restrictor dampers and louvres.
Properties
- 5 and 10 Nm torque and holding torque
- 24 V ~/=
- 35, 60 or 120 sec. running time for 90° can be selected with switch
- Protection class IP54
- Operating noise < 30 db(A)
- Self-centring axle adaptor
- Gearbox that can be disengaged for positioning the damper and manual adjustment
- Stepping motor with control and electronic cut-off
- Maintenance-free
- Intelligent rotation angle adaptation, incl. adaptation of feedback
- Free configuration using CASE Drives PC tool
Technical description
- Two-part housing made of self-extinguishing plastic, lower section black and upper section yellow
- Suitable for all installation positions
- Connecting cable 1.2 m long, 5 x 0.5 mm²
- Direction of rotation can be changed by reversing connections
|
